MPO/APC-FC/UPC SM 8F G652D 3.0mm LSZH
March 4, 2025
|
L≤1m |
-1cm≤△L≤+5cm |
|
1m＜L≤10m |
-10cm≤△L≤+10cm |
|
L≥10m |
-10cm≤△L≤1％*L |
|
Connector1 |
Connector2 |
Endface Type |
Fiber Type |
Cable Diameter |
Sheath Material |
Colour |
|
MPO |
FC |
APC/UPC |
G652D |
3.0mm |
LSZH |
Yellow |
|
It can also be customized according to the specifications specified by customers. |
||||||
|
Cable Diameter （mm） |
Inner Sheath Diameter（mm） |
Tension（N） Long term/ Short term |
Crush Resistance（N/100mm） Long term/Short term |
|
|
|
|
|
|
3.0±0.2 |
0.25±0.05 |
30/100 |
100/300 |
|
Item |
Connector |
|
Insertion Loss(dB) |
MPO≤0.75,FC≤0.3 |
|
Return Loss(dB) |
SM:≥50（UPC） ≥60（APC）; MM:≥25（PC） |
|
Conform to criterion |
IEC61754 |
(1) Vibration test
Test criterion：IEC 61300-2-1
Amplitude：0.75mm
Frequency sweep range：10~50HZ/minute
Time：30minutes
After test：
a)No mechanical damage, such as deformation, crack, slack, etc
b) The optical performance conforms to Table 5
(2) Impact test
Test criterion：IEC 61300-2-12
Drop height：1.5m
Drop times：5/times
After test：
a)No mechanical damage, such as deformation, crack, slack, etc
b) The optical performance conforms to Table 5
(3)Mating durability test
Test criterion：IEC 61300-2-2
Durability：500/times
After test：
(3) Change of temperature：
b) The optical performance conforms to Table 5
No mechanical damage, such as deformation, crack, slack, etca)No mechanical damage, such as deformation, crack, slack, etc
b) The optical performance conforms to Table 5
(2) Low temperature test
Test criterion：IEC61300-2-17
Test criterion：-25℃
Time：96/hours
After test：
(1) High temperature test
Test criterion：IEC61300-2-18
Temperature：70℃
Time：96 /hours
After test：
a)No mechanical damage, such as deformation, crack, slack, etc
b) The optical performance conforms to Table 5
Environmental performances
Test criterion：IEC 61300-2-22
Temperature range：-25℃to + 70℃
Time：96/hours，12/cycles
After test：
b) The optical performance conforms to Table 5
No mechanical damage, such as deformation, crack, slack, etcb) The optical performance conforms to Table 5
(4) Damp heat
Test criterion：IEC 61300-2-19
Test condition：40℃，93% RH
Time：96/hours
After test：
No mechanical damage, such as deformation, crack, slack, etc 光学性能符合表五
|
No. |
Test Item |
Insertion Loss variation（dB） |
|
1 |
Vibration test |
≤0.2 |
|
2 |
Impact test |
≤0.2 |
|
3 |
Mating durability test |
≤0.2 |
|
4 |
High temperature test |
≤0.2 |
|
5 |
Low temperature test |
≤0.2 |
|
6 |
Change of temperature |
≤0.2 |
|
7 |
Damp heat |
≤0.2 |
Opration temperature: -25℃～+70℃
Installation temperature: -10℃~+60℃
Storage temperature: -40℃~+85℃